#################################################################################################
#												#
# 	This is the sample PRICOM Design Configuration File for the Dream Player PRO		#
#	This supports DreamPlayer-PRO and MC only, not used in the DreamPlayer-Classic		#
#												#
#       To comment out a line and have it ignored, place a # at the beginning of the line	#
#	Case is NOT sensitive, we used upper and lower case to make the settings more readable	#
#												#
#	Settings are read at power-on, and only apply until power is removed			#
#	The DreamPlayer looks for any file that starts with "Config" and ends with ".TXT"	#
#	So a file named "Config-3113.txt" or "Config-MainLine.txt" will work perfectly		#
#												#
#       (There is NO restriction on file length, so put as many comments as you want)		#
#												#
#################################################################################################


#################################################################################################
#			General Modes Setup Here						#
#################################################################################################

# BackgroundMode	# Plays the background track (named "0-xxxx.wav" on the SD Card)
# BackgroundMode	# Enable Background track mode (called Track-0, AutoStart, LoopMode)

# AutoStart=n,n,...	# Automatically start tracks when the Dream Player Starts
# AutoStart=6		# Set Autostart mode, play these tracks at Startup

# LoopMode=n,n,...	# LoopMode makes the Dream Player Loop at end of the listed track(s)
# LoopMode=6		# Enable LoopMode for the listed tracks

# MultiRandom=n,n,..	# Select tracks that have 8 random sub-tracks under each
# MultiRandom=2,4	# Enable multi-random mode for the listed tracks

# MultiPart=n,n,..	# Select tracks that will play 3-part audio files. Name the tracks as follows
			# 1A-xxx.wav 1B-xxx.wav and 1C-xxx.wav for the Attack, Sustain, and Decay
# MultiPart=2,4		# Enable multi-Part trigger and playback for the listed tracks

# TrackResume=n,n,...	# When a track is stopped, resume where it left off rather than begining
# TrackResume=1		# Enable TrackResume for the listed tracks

# MaxPlayback=n		# Sets the maximum number of tracks that can play at the same time
# MaxPlayback=3		# set Maximum Simultanious Tracks to 3


#################################################################################################
#			Trigger Input Configuration Below					#
#################################################################################################

# LoopWhileTrigger=n,n,.# Loop the track as long as the Trigger Input is active
# LoopWhileTrigger=2,3	# Enable Loop While Trigger mode for the selected tracks

# HighTrigger=n,n,...	# Trigger Input is Active HIGH instead of the normal Active LOW level
# HighTrigger=1		# Enable High Trigger for the selected trigger inputs

# NoRetrigger=n,n,...	# Dream Player will IGNORE trigger until current track completes playing
# NoRetrigger=1,2,3	# Enable No Retrigger for the selected trigger inputs

# ToggleTrigger=n,n,...	# Uses a toggle switch on the trigger input to select file 1 or 2
# ToggleTrigger=1	# When trigger is OFF "1a-Name.wav", when trigger is ON "1b-name.wav"

# StartupDelay=xxxx	# Ignore triggers for time in Seconds. For Motion Sensors (new in v1.3)
# StartupDelay=30	# For PRICOM PIR Motion Sensor, set this value to 30 secs


#################################################################################################
#			Control Outputs Setup Here						#
#################################################################################################

# ControlStart=n,n,...	# pulse the Control Output at Start of Track Playback (ControlPulseTime)
# ControlStart=1,2,3,4	# Enable on the selected tracks

# ControlEnd=n,n,...	# pulse the Control Output at END of Track Playback (ControlPulseTime)
# ControlEnd=1,2,3,4	# Enable on the selected tracks

# ControlDecay=n,n,...	# pulse the Control Output when Decay in a 3-part file starts (ControlPulseTime)
# ControlDecay=1,2,3,4	# Enable on the selected tracks

# ControlLoop=n,n,...	# Activate the Control Output only when a file "loops" playback
# ControlLoop=1,2,3,4	# Enable on the selected tracks

# ControlPlay=n,n,...	# Activate the Control Output for as long as the Track is Playing
ControlPlay=1,2,3,4		# Enable on the selected tracks

# ControlPulseTime=500	# Set the Control Output Pulse Length in Milliseconds (for ALL Ouputs)
# ControlPulse1=100	# Set the Control Pulse time for this COntrol Ouput #1
# ControlPulse2=200	# Set the Control Pulse time for this COntrol Ouput #2
# ControlPulse3=300	# Set the Control Pulse time for this COntrol Ouput #3
# ControlPulse4=400	# Set the Control Pulse time for this COntrol Ouput #4


#################################################################################################
#			MIDI File Setup Here							#
#################################################################################################

# MidiControl		# Tells the Control Output Pins to MIDI and not the Control Settings above


#################################################################################################
#			PNET Dimmer Setup Here							#
#												#
# PNET Dimmer will fade-in at start of playback, Dimmer will fade-out at end of playback	#
#################################################################################################

# PNETChanTrack1=n	# select PNET Channel for Track1 (1-256).
# PNETChanTrack1=1	# Sets Track1 to Fadein and Fade out PNET Chan1 (first chan of Slot0)
# PNETFadeIn1=1000	# Sets the Fade In for Track1 in Milliseconds (default = 1000 = 1 second)
# PNETFadeOut1=1000	# Sets the Fade Out for Track1 in Milliseconds (default = 1000 = 1 second)

# PNETChanTrack2=n	# select PNET Channel for Track2 (1-256).
# PNETChanTrack2=2	# Sets Track1 to Fadein and Fade out PNET Chan2 (second chan of Slot0)
# PNETFadeIn2=2000	# Sets the Fade In for Track1 in Milliseconds (default = 1000 = 1 second)
# PNETFadeOut2=2000	# Sets the Fade Out for Track1 in Milliseconds (default = 1000 = 1 second)

# PNETChanTrack3=n	# select PNET Channel for Track3 (1-256).
# PNETChanTrack3=3	# Sets Track1 to Fadein and Fade out PNET Chan3 (third chan of Slot0)
# PNETFadeIn3=4000	# Sets the Fade In for Track1 in Milliseconds (default = 1000 = 1 second)
# PNETFadeOut3=4000	# Sets the Fade Out for Track1 in Milliseconds (default = 1000 = 1 second)

# PNETChanTrack4=n	# select PNET Channel for Track4 (1-256).
# PNETChanTrack4=4	# Sets Track1 to Fadein and Fade out PNET Chan4 (fourth chan of Slot0)
# PNETFadeIn4=8000	# Sets the Fade In for Track1 in Milliseconds (default = 1000 = 1 second)
# PNETFadeOut4=8000	# Sets the Fade Out for Track1 in Milliseconds (default = 1000 = 1 second)


#################################################################################################
#			Track Playback Setup Here						#
#################################################################################################

# NoFade=n,n,...	# this makes the Dream Player stop quickly instead of Fading
# NoFade=1,2,3,4	# Set the NoFade value for the selected tracks

# FadeTime=xxxx		# Set the fade OUT time in Milliseconds (5000 = 5 secs) (default is 5secs)
FadeTime=2000		# Set the fade OUT time for ALL tracks to 2 secs
# FadeTime0=1000	# Set the fade OUT time for Background Track Only
# FadeTime1=1000	# Set the fade OUT time for Track #1 only
# FadeTime2=2000	# Set the fade OUT time for Track #2 only
# FadeTime3=3000	# Set the fade OUT time for Track #3 only
# FadeTime4=4000	# Set the fade OUT time for Track #4 only

# FadeInTime=xxxx	# Set the fade IN time for "resume" tracks when resuming playback
FadeInTime=2000		# Set the fade IN time for ALL tracks to 2 secs (default is 2 secs)
# FadeInTime0=250	# Set the fade IN time for Background Track only
# FadeInTime1=250	# Set the fade IN time for Track #1 only
# FadeInTime2=500	# Set the fade IN time for Track #2 only
# FadeInTime3=750	# Set the fade IN time for Track #3 only
# FadeInTime4=1000	# Set the fade IN time for Track #4 only



#################################################################################################
#			Audio Setup Here							#
#################################################################################################

# MasterVolume=xxx	# Master Output volume (10-100%, '0' would be silly...) (default is 100)
MasterVolume=100	# Set Master Output Volume to 100%

# TrackVolume=xxx	# Track Output volume (10-100%, '0' would be silly...) (default is 75)
# TrackVolume=75	# Set ALL Track Output Volumes to 75%

TrackVolume0=30		# Set Output volume for Background Track
TrackVolume1=75		# Set Output volume for track #1
TrackVolume2=75		# Set Output volume for track #2
TrackVolume3=75		# Set Output volume for track #3
TrackVolume4=75		# Set Output volume for track #4
TrackVolume5=75		# Set Output volume for track #5
TrackVolume6=75		# Set Output volume for track #6



#End of Line#